Mon-Fri: 8:00AM - 6:00PM

24h Emergency Service

HVAC Services North Branch MN | My AC stopped cooling! What can I do?

HVAC Services North Branch MN | My AC stopped cooling! What can I do?

HVAC Services North Branch MN

HVAC Services North Branch MN | (651) 492-0582 | Introduction

It’s hot, and you need your air conditioning unit in your North Branch MN home to work. But instead of cooling the room, you find yourself sweating more than ever. What can you do? There are several things that could be going on: HVAC Services North Branch MN

If the temperature is above 75 degrees, call for emergency service.

If the temperature is above 75 degrees, call for HVAC emergency service at (651) 492-0582 ! For your home in North Branch Minnesota. HVAC Services North Branch MN

If you are comfortable working on your AC, try these tips:

  • Check your filters. If they’re dirty or clogged with dust, change them immediately.
  • Make sure that no objects are blocking the vents in your home or office.

If you notice that your AC is not cooling the room effectively, check for leaks. Look for damp spots on the floor or ceiling near vents, and use a flashlight at night to illuminate ducts or pipes. If there are any leaks, call an HVAC professional in North Branch Minnesota immediately.

Check the thermostat and make sure it’s set to cool.

The thermostat is a device that controls the air conditioning system. It can be an indoor thermostat (located near your air conditioner) or an outdoor one mounted to the wall in front of your house. Before you do anything else, make sure it’s set correctly: HVAC Services North Branch MN

  • Check that the thermostat is set to cool mode. If it’s not, press any button on the remote or controller to change this setting. The fan should kick off and restart after pressing a button on either of these devices; if not, continue reading this section for more troubleshooting advice!
  • Make sure that both temperature settings are correct: one for “cooling” and another one for “heating.” If either doesn’t match what’s currently going on in your house (say if it’s hot outside but feels like winter inside), then check which one needs adjusting before trying again!

If neither of these things worked, check your thermostat battery. If it’s dead, replace it before trying again!

Ensure the vents are open.

If your vents are closed, it’s likely that the AC unit is not cooling. If you’re unsure if your vents are open and the fan is running, check the air vents on your unit and make sure they aren’t blocked by any furniture or other objects. However, if you do find that they are indeed blocked, remove them and try again. HVAC Services North Branch MN

Another possibility could be that there is something blocking the air flow in front of or behind your system. Check to see if anything might be preventing cool air from reaching where it needs to go: behind walls/ceilings/floors; under desks/tables/chairs; near windows with blinds partially closed (or fully closed); etcetera.

If nothing seems like it could be causing an issue with airflow, then it might be time to contact a professional! HVAC Services North Branch MN

Check to see if the air filter needs changing.

First, check to see if your air filter needs changing. If you’re unsure of how often this should happen (it can vary depending on your home and the filters you use), ask your HVAC company in North Branch MN for their advice. If a change is in order, don’t worry: it’s an easy process that only takes a few minutes.

You’ll need:

  • A new filter
  • An old towel or cloth
  • Some scissors (if applicable)

A new filter is the most important thing you’ll need. The exact type of filter will vary depending on your home and HVAC system, but there are many different options available. If you’re unsure of which one to use, ask your HVAC professional for advice.

An inspection on the breaker box or fuse box and make sure a breaker isn’t tripped or a fuse blown.

A common cause of AC failure is a tripped breaker or blown fuse. To check this, you’ll need to inspect your breaker box or fuse box and make sure a breaker isn’t tripped or a fuse blown.

  • Open your circuit panel. HVAC Services North Branch MN
  • If you have a circuit panel, look for the power switch on the left side of it. Flip this switch off and then back on again. This will reset your house’s power supply so that it can start up properly again. If you don’t have one of these switches, check all of your individual breakers or fuses in each section to make sure they aren’t in the off position (these are usually labeled as “off” instead of just “open”).

It is good make sure the fan is set to AUTO.

If the AC doesn’t blow cold air, it’s possible that the fan setting is incorrect. It may be set to ON or AUTO, but if you’re not getting any cool air from your system then chances are good that it’s on the wrong setting. If you have a thermostat, check to see if it has been set properly—many modern thermostats allow users to control different functions within their system using a dial or touchscreen display.

If you don’t have a thermostat, then chances are good that your fan is either set incorrectly or has stopped working altogether (more on this later). To check which setting your AC unit is on:

  • Remove any debris around the outside of your unit and open up its front panel so you can access its interior components.* Check for any loose wires leading from its front panel into other parts of the unit—these can often get damaged during shipping or installation.* Look at all of these wires carefully; if any one of them is loose or unplugged from where it belongs then something may be wrong with this part of your AC unit too!

If you find that one of your breakers is tripped or a fuse blown, flip it back on and then try to power up your air conditioner again. If everything works fine after doing this, then it’s likely that there was just an issue with the breaker or fuse being turned off.

Contact us for an appointment so that we can check the problem out further.

  • Get an appointment with a professional. HVAC Services North Branch MN
  • Make sure you’re protected from the heat.
  • Have an HVAC professional check out your AC unit for any potential problems, including:
  • Clean filters and coils (if applicable)
  • Check for water leaks in or around the unit
  • Ensure proper airflow is getting through to each room

Make sure the evaporator coils are clean Check the pressure switch (if applicable If you don’t see any loose wires, then check to see if there is a switch on the front of your unit that controls fan speed. If so, make sure that it’s set to either AUTO or ON; otherwise, your AC won’t be able to push out cool air! For more information about how to properly maintain and care for your AC unit, check out our blog post on AC maintenance tips here.)

Be sure to contact a professional right away if you’re experiencing problems with your AC

If your AC isn’t cooling, there are several things you can do to troubleshoot the problem. First, check to make sure that the fan setting is set to AUTO. If it’s not on AUTO, try switching it over and see if this makes a difference in how your AC performs. Next, check the thermostat settings and make sure that it is set to COOL! Next up: open those vents! If they’re closed up tight with dust and dirt, you’ll be blocking air flow from getting into your home and cooling off those hot summer days.

Finally (and this may seem obvious), but make sure there aren’t any blown fuses or tripped breakers in your breaker box or fuse box!

HVAC Services North Branch MN | Conclusion

This can be a stressful time of year, especially if your AC is not working properly. We hope we’ve given you some tips on how to troubleshoot the problem and what steps to take next. If you have any other questions about this issue or need assistance with anything else, please don’t hesitate to contact us at any time at (651) 492-0582!

Pine City | Rush City | Hinckley | Mora |Braham | Harris | Stacy | Cambridge |Isanti | North Branch | Ogilvie | Milaca | Sandstone | Finlayson | Askov | Forest Lake